12” 4-Ohm Subwoofer

XS12S

Built for the Road Ahead

Product Features

Your Jensen XS series subwoofers comes equipped with all the components that will may any drive more enjoyable. Your car subwoofer comes with a detailed instruction manual that will help you get setup and ready to go in no time. However, we do suggest professional installation to prevent any issues with your new Jensen subwoofer.

We made sure that at the time of installation you had everything you needed for a smooth upgrade. All JensenXS subwoofers comes with the essential hardware required to install them properly in your car.

Designed & Engineered in the USA

We are extremely proud to say that our Jensen car audio subwoofers are expertly designed and engineered right here in the USA using cutting edge equipment and technology.

Our engineers take into account several factors and perform numerous tests to ensure that the JensenXS subwoofer you receive is above your expectations. We aim to always provide innovative and long lasting products that provide continuous studio quality performance.

Reinforced Steel Basket

We take pride in only putting the very best in our JensenXS subwoofer lines. The addition of the reinforced low resonance basket and heavy-duty motor structure with 40oz magnet is to isolate unnecessary vibrations producing low resonance and accurate bass.

Endless Journeys

Lower your car windows with confidence with your JensenXS car subwoofer. You will now have up to 1400 Watts at your finger tips. Traveling the country is never the same without being able to listen to your favorite tunes so make sure that they are listening to them at the best auditory experience on the planet.

Built for the Road Ahead.

In stock
Part Number
XS12S

Specs

System Type    12" Subwoofer
Impedance    4 ohms
Frequency Response    22Hz-250Hz
Total Peak Power    1400W
RMS Power    50-350W
Efficiency 1W / 1M    90dB
Efficiency 1W in-car    93dB
Xmax    10mm
Type    Subwoofer
Diameter    12"
Woofer Cone Material    Polypropylene
Woofer Surround Material    NBR (Nitrile Butadiene Rubber)
Woofer Spider    Nomex fiber blend with stitched leadwires
Vented Spider    Yes
Woofer Voice Coil Diameter    2" (51mm)
Woofer Magnet Weight    40oz.
Woofer Basket    Stamped steel with textured black paint
Terminals    8ga. spring terminals
Tweeter Height (from mounting surface)    N/A
Mounting Cutout    279mm (11.00")
Mounting Depth    138mm (5.45")
Fs    29 Hz
Qts (Total Q)    0.452
Qes (Electrical Q)    0.512
Qms (Mechanical Q)    3.90
Vas    112L (3.95 cu.ft)
DC Resistance    3.40 ohms
Driver Radiating Area    513 sq. cm (79.5 sq. in)
Volume Displacement    0.51L (0.018 cu. ft)
Mms    106g
Mmd    132g
BL    10.85
© 2020 NAMSUNG AMERICA INC. ALL RIGHTS RESERVED. *PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.