500 Watts 2-Channel Amplifier


The Jensen Power 250x2 Dual Channel Car Amplifier with 500 Watt Peak Performance is a force to be reckoned with. Your dual channel car amplifier allows you to connect up to two speakers or subwoofers giving you optimal sound performance when you need it the most. We anticipated continuous use of your amplifier so we engineered a High Current & Efficient MOSFET design that enables you to have insurmountable power. Your dual channel speaker/subwoofer amplifier delivers up to 500 Watts of Peak Power, 250 Watt RMS via 1 Channel Bridged at 4 Ohm Impedance, 85 Watt RMS via 2 Channel at 4 Ohm Impedance and 125 Watt RMS via 2 Channel at 2 Ohm Impedance.

Your dual channel car amplifier is as versatile as your needs, so we added a pass through RCA connection giving you the option of bridging various amplifiers for unmatched sound superiority and ingenuity. We cannot stress safety enough here at Jensen so we designed a built in short circuit protection via a thermal and DC offset safety protection for your amplifier. The journey will never be the same without Jensen.

In stock
Part Number


  • Continuously Variable Bass EQ 0 ~ 12dB at 45Hz

  • High Current / High Efficiency Power Supply (MOSFET Design)

  • High Current Toshiba Output Transistors

  • Low Noise / Low Distortion Pre-Amp Circuitry

  • Optimized Class AB Design Minimizes Distortion and Reduces Idle Current

  • Designed to Drive 4 Ohm and 2 Ohm Loads

  • Continuously Variable Low Pass Filter 40Hz - 300Hz (12dB / Octave)

  • Continuously Variable Bass EQ 0 ~ 12dB at 45Hz

  • Frequency Response 10Hz - 60kHz (-3dB)

  • Dimensions 9.5" x 8.25" x 2.125" (L x W x H)

  • Pass-Thru RCA

  • Short Circuit, Thermal and DC Offset Protection

  • Diagnostic LEDs: Green - Power / Amber Fault

CEA Specifications:
Power Output: 85 Watts RMS x 2-Channels Into 4-Ohms @ 1% THD+N
Signal to Noise Ratio: 100dBA Below Reference (Reference: 1 Watt, 4-Ohms

Additional Power Output:
125 Watts RMS x 2-Channel Into 2-Ohms @ 1% THD+N
250 Watts RMS x 1-Channel (Bridged) Into 4-Ohms @ 1% THD+N
Frequency Response: 10 Hz - 60 kHz, -3dB (Reference: 1 Watt)