4-inch two-way speaker with 1-inch voice coil
4" Two-Way Speaker w/1" Voice Coil
20mm Silk dome Tweeter
Injection Molded Polypropylene Cone w/ Rubber Surround
Sensitivity (2.83V/1M): 90Db
Heavy Duty Motor Structure w/2.5mm Xmax
The Jensen DUB Edition 4" two-way speakers are an outstanding choice to replace a bad set of factory 4" speakers. The DUBs240 two-way design handles 180 Watts peak power, 45 Watts RMS, and features Jensen's injection molded polypropylene cone with rubber surround and heavy duty motor structure with 2.5mm Xmax for improved sensitivity and reduced distortion.
This pair of speakers has been crafted above all for excellent audio performance offering a frequency response of 65Hz~35kHz and 4-Ohm impedance. The aggressive Jensen DUB Edition car speakers are black with silver accents ready to suit any interior color or style and are designed with a shallow mounting depth for easy install into a wide variety of vehicles.
Power Handling: 45 Watts RMS / 180 Watts Peak
Frequency Response: 65Hz~35kHz
Mounting Depth: 1.9"
Mounting Cutout: 3.7"
|System Type||4" two-way speaker with 20mm silk dome tweeter|
|Frequency Response||65Hz - 35kHz|
|Total Peak Power||180W|
|Efficiency 1W / 1M||87dB|
|Efficiency 2.83V / 1M||90dB|
|Tweeter||20mm silk dome|
|Woofer Cone Material||Polypropylene w/ mica flake|
|Woofer Surround Material||NBR (Nitrile Butadiene Rubber)|
|Woofer Spider||Nomex fiber blend|
|Woofer Voice Coil Diameter||1" (25mm)|
|Woofer Magnet Weight||6|
|Woofer Basket||Stamped steel with textured black paint|
|Terminals||0.205" and 0.110" tab|
|Grille Height||20mm (0.79")|
|Tweeter Height (from mounting surface)||16mm (0.63")|
|Mounting Cutout||93mm (3.7")|
|Mounting Depth||48.5mm (1.9")|